
X-S10 Firmware update
Version: 3.11
Last Updated: 28.03.2024
Overview
Change in the number of frames that can be stored in a single folder
ăťThe maximum number of frames that can be stored in a single folder will be changed from 9,999 to 999 with V.2.20 or later.
If you are using a macOS computer to process recorded files in the SDXC memory card, make sure to follow the procedure below before upgrading the firmware.
Follow the instructions in âII-2. If using an SDXC memory card with existing files or one thatăhas not been recently formatted:â in the article titled âImportant notice for consumers processing FUJIFILM digital camera files using macOSâ that was published on Feb. 2 in this web site and then format the SDXC memory card before using it.
NOTES
Please read this update after refreshing this page.
- In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the âControlâ key and âF5â key.
- In case of Mac (Safari / Google Chrome), hold down the âCommandâ key and âRâ key.
- In case of Mac (FireFox), hold down the âCommandâ, âShiftâ and âRâ keys at same time.
The firmware upgrade is not required if its version is latest.
- Refer to â2) Firmware version checking procedureâ in the âDetail of firmware update stepsâ below to check the firmware version.
Please use your camera and lens with the latest version of firmware.
- If you donât use them with the latest version, you may not enjoy their full performance. Check the latest firmware version from the link below.
Detail of the firmware update
The firmware update Ver.3.11 from Ver3.10 incorporates the following issue:
-
A firmware bug is fixed that the images taken were not saved to the memory card in the camera in case that the image transfer setting to âFUJIFILM XAppâ or âFUJIFILM Camera Remoteâ is set to âAUTO IMAGE TRANSFER ORDERâ.
The firmware update Ver.3.10 from Ver3.01 incorporates the following issues:
-
Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.
[Target interchangeable lens]
ăťXF16-55mmF2.8 R LM WRďźVer.1.30 or laterNote:Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.
-
Other minor bugs are fixed.
The firmware update Ver.3.01 from Ver.3.00 incorporates the following issue:
-
The firmware bug has been fixed that 24-hour display cannot be selected for âDATE/TIMEâ, which was newly added with Ver. 3.00.
The firmware update Ver.3.00 from Ver.2.62 incorporates the following issues:
Regarding the details of No.2, 3, 4, 5 and6, download the âX-S10 New Features GuideďźťVer.3.00]â from our website.
ăťX-S10 New Features Guide: English, Français, Deutsch, EspaĂąol, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, PŃŃŃкиК, Suomi, ä¸ćçŽ, ä¸ćçšéŤ, íęľě´, ภาชาŕšŕ¸ŕ¸˘, Arabic
-
The firmware for each model supports new application software âFUJIFILM XAppâ for GFX and X series cameras.
âFUJIFILM XAppâ is the advanced application software for the current one, âFUJIFILM Camera Remoteâ, with which wireless communication becomes more stable and faster so that images and movies transportation from the camera becomes more smooth and comfortable with the smartphone and tablet terminal.
Moreover, the operation with the smartphone and tablet terminal becomes much simpler than the current application software, since all the data transportation operations, except for the âBluetooth Pairingâ between camera and the application software required at the first time only, are completed with the smartphone and tablet terminal.
Adding on the âLive View Modeâ and access/download functions of the data in camera, several new functions are available, such as âBackup/Restoreâ to store the setting data in the shooting and setup menus, âTimelineâ to review the shooting information of the camera/lens, shooting count/location, etc. and âActivityâ to show the accumulated summary of the shooting count total, film simulation usage, etc., which should make GFX and X series cameras attractive more and more.Note-1: Please see NEWS RELEASE for the details of âFUJIFILM XAppâ.
Fujifilm releases the FUJIFILM XApp for the GFX / X Series of digital camerasNote-2: âFUJIFILM XAppâ works with iOS/iPad OS 13 or later and Android OS 11 or later.
Please download the âFUJIFILM XAppâ from the following site by selecting the OS version of your smartphone / tablet terminal and the camera.âFUJIFILM XAppâ Download Site
Note-3: âFUJIFILM XAppâ will be available as soon as it is ready.
-
âAREA SETTINGâ has been added in the âUSER SETTINGâ of the Setup menu, which changed the operation procedure for the initial setting and âTIME DIFFERENCEâ setting as follows.
ăť24 hours display can be selected in âDATE/TIMEâ.
ăťYour living location can be selected with the world map as well as âSaving timeâ can be on and off in âAREA SETTINGâ.
ăťâLOCALâ can also be selected with the world map in âTIME DIFFERENCEâ.Note-1: âARIA SETTINGâ and âDATE/TIMEâ menus appear when turning on the camera right after firmware upgrade. So please set up the above items in these menus.
-
âRESETâ function in the Setup menu will change.
ăťâAREA SETTINGâ has been added on the list that would not be reset in âSET-UP RESETâ function.
ăťâINITIALIZEâ function has been added to reset all settings to default values, other than except for custom white balance. -
Some of the menu related to the wireless connection changed as follows.
ăťâBluetooth SETTINGSâ in âCONNECTION SETTINGâ of the Setup menu has been changed to âBluetooth/SMARTPHONE SETTINGâ and âIMAGE TRANSFER WHILE POWER OFFâ has been added in this menu.
ăťâAUTO IMAGE TRANSFERâ has been changed to âAUTO IMAGE TRANSFERâ and âSMARTPHONE SYNC. SETTINâ has been changed to âSMARTPHONE LOCATION SYNCâ for each. -
Some of the menu items of âGENERAL SETTINGSâ in âCONNECTION SETTINGâ of the Setup menu has been change as follows.
ăťâNAMEâ and âRESIZE IMAGE FOR SMARTPHONEH 3Mâ has been moved into âBluetooth/SMARTPHONE SETTINGâ menu.
ăťâGEOTAGGINGâ has been moved into âSAVE DATA SET-UPâ menu.
ăťâLOCATION INFOâ has been moved into âSCREEN SETUPâ menu.
ăťâăWi-Fiă BUTTON SETTINGâ has been moved into âBUTTON/DIAL SETTINGâ menu and changed to âFn1 BUTTON SETTINGâ. -
âBluetooth Pairing Registrationâ has been added in âFUNCTION (Fn) SETTINGâ while pushing and holding the DISP/BACKâ button, which changed the procedure to connect to the smartphone.
-
FUJINON lens, XF8mmF3.5 R WR has been available.
-
Other minor bugs have been fixed.
Revised specification from Ver.2.61 to Ver.2.62
-
The firmware bugs have been fixed, which caused that the cameras rarely froze right after the completion of the firmware update with the current version using a smartphone (tablet) in which Camera Remote application software was installed.
Note:
When updating the firmware with the revised version, please be sure to update the firmware using an SD card according to steps below.
Detail of firmware update steps
Revised specification from Ver.2.60 to Ver.2.61
-
The firmware bug has been fixed, which caused that the white frame of the AF point is not displayed correctly when setting the âAF MODEâ to âZONEâ and âAF POINT DISPLAYâ to âONâ with the camera body firmware Ver. 2.60.
Revised specification from Ver.2.50 to Ver.2.60
Please refer to the âX-S10 New Features Guideâ for information on the following item No.1 that has been updated. For the âTripod Grip (TG-BT1)â initial settings and operating instructions, please download the âTripod Grip (TG-BT1) Userâs Manualâ from our website.
ăťX-S10 New Features Guide: English, Français, Deutsch, EspaĂąol, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, PŃŃŃкиК, Suomi, ä¸ćçŽ, ä¸ćçšéŤ, íęľě´, ภาชาŕšŕ¸ŕ¸˘, Arabic
ăťTripod Grip (TG-BT1) Userâs Manual: English, Français, Deutch, EspaĂąol, Italiano, ä¸ćçŽ, Arabic
-
âTripod Grip (TG-BT1)â has been available.
When the camera and âTripod Grip (TG-BT1)â are connected via Bluetooth, you can shoot still images and movies while holding the grip, as well as zoom in on lenses(*1) with an electric zoom function.
*1 The XC15-45mmF3.5-5.6 OIS PZ will be compatible in January 2023.
-
Other minor bugs have been fixed.
Revised specification from Ver.2.40 to Ver.2.50
Regarding the detail of the improvements, download the âX-S10 New Features Guideâ from our website.
New Features Guide: English, Français, Deutsch, EspaĂąol, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, PŃŃŃкиК, Suomi, ä¸ćçŽ, ä¸ćçšéŤ, íęľě´, ภาชาŕšŕ¸ŕ¸˘, Arabic
-
The following operational flow and functions of the zooming and focusing in the camera menu were added or changed.
ăťâTOUCH ZOOMâ function was added in the âTOUCH SCREEN SETTINGâ menu, which is called through the operation flow below.
[ SETUP MENU ] â [ BUTTON/DIAL SETTING ] â [ TOUCH SCREEN SETTING ]ăťâPOWER ZOOM LENS FUNCTION(Fn) SETTINGâ menu to allocate the âFnâ button for the power zoom lens functions was added in âBUTTON/DIAL SETTINGâ menu, which is called through the operation flow below.
[ SETUP MENU ] â [ BUTTON/DIAL SETTING ]
The functions added are âZOOM/FOCUS CONTROL RINGâ, âCONSTAN SPEED ZOOM (T/W)â and âCONSTAN SPEED FOCUS (N/F)â.ăťâLENS ZOOM/FOCUS SETTINGâ menu was added in âBUTTON/DIAL SETTINGâ menu, which is called through the operation flow below.
[ SETUP MENU ] â [ BUTTON/DIAL SETTING ]
The functions added are âCONSTANT SPEED ZOOM (8 steps)â, âCONSTANT SPEED FOCUS (8 steps)â, âCONSTANT SPEED ZOOM/FOCUS (Fn) OPERATIONâ, âSTART/STOP SWITCH & ACTIVE WHILE PRESSINGâ, âZOOM RING ROTATEâ and âZOOM/FOCUS CONTROL RINGâ.ăťâFOCUS RINGâ and âFOCUS RING OPERATIONâ settings were moved to âLENS ZOOM/FOCUS SETTINGâ menu which is called through the operation flow below and the inscription of the âFOCUS RINGâ was changed to â FOCUS RING ROTATEâ.
[ SETUP MENU ] â [ BUTTON/DIAL SETTING ] â [ LENS ZOOM/FOCUS SETTING ] -
Exposure adjustment function for the pre-view image/movie has been enhanced by optimizing the parameters for the exposure control when XF150-600mm is used.
-
âAF+MFâ function has been available even at movie taking.
Revised specification from Ver.2.30 to Ver.2.40
-
FUJINON lens, XF150-600mmF5.6-8 R LM OIS WR has been available.
-
The accuracy of AF function has been improved at manual focus mode using âOne-Push AFâ.
-
Other minor bugs have been fixed.
Revised specification from Ver.2.20 to Ver.2.30
Regarding the detail, download the âX-S10 New Features Guideâ from our website.
New Features Guide: English, Français, Deutsch, EspaĂąol, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, PŃŃŃкиК, Suomi, ä¸ćçŽ, ä¸ćçšéŤ, íęľě´, ภาชาŕšŕ¸ŕ¸˘, Arabic
-
XLR microphone adapter* has been supported. As a result, [XLR MIC ADAPTER SETTING] options have been added under the [AUDIO SETTING] both in the movie menu and in [MOVIE SETTING] in the photo menu as well as [4ch AUDIO PLAYBACK] option has been added under [SOUND SETTING] in the setup menu.
*TEAC TASCAM CA-XLR2d-Fâ XLR microphone adapters has been supported.
-
The firmware bugs have been fixed, which rarely caused that the Bluetooth paired device would not be registered correctly or that the camera would not turn on after paired device was registered.
Revised specification from Ver.2.10/2.11 to Ver.2.20
-
The following specification has been revised to improve compatibility with SDXC memory card format.
The maximum number of frames that can be recorded in a single folder has been changed from 9,999 to 999.
If you are using a macOS computer to process recorded files in the SDXC memory card, make sure to follow the procedure below before upgrading the firmware.
Follow the instructions in âII-2. If using an SDXC memory card with existing files or one thatăhas not been recently formatted:â in the article titled âImportant notice for consumers processing FUJIFILM digital camera files using macOSâ that was published on Feb. 2 in this web site and then format the SDXC memory card before using it. -
Minor bugs have been fixed.
The firmware update Ver.2.10 from Ver.2.00 incorporates the following issues:
Regarding the detail, download the âX-S10 New Features Guide[2.10]â from our website.
New Features Guide: English, Français, Deutsch, EspaĂąol, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, PŃŃŃкиК, Suomi, ä¸ćçŽ, ä¸ćçšéŤ, íęľě´, ภาชาŕšŕ¸ŕ¸˘, Arabic
-
âinstax mini Linkâ and âinstax Link WIDEâ will be added as applicable printers for X-S10
⢠The camera now supports smartphone printers, âinstax mini Linkâ and âinstax Link WIDEâ series.
⢠Due to the above modification, items of the âinstax PRINTER PRINTâ will be changed in the playback] menu.
⢠In addition, the menu title, âinstax PRINTER CONNECTION SETTINGâ will be renamed as âinstax PRINTER SETTINGSâ as well as its content has been changed, which appears through [SETUP MENU] â [CONNECTION SETTING]. -
The electronic level display will work in wider range of the tilt angle, so that you can use the electronic level on the LCD even if you tilt the camera more than that with the current firmware.
-
Minor bugs have been fixed.
The firmware update Ver.2.00 from Ver.1.04 incorporates the following issues:
Regarding the detail, download the âX-S10 New Features Guide[2.00]â from our website.
New Features Guide: English, Français, Deutsch, EspaĂąol, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, PŃŃŃкиК, Suomi, ä¸ćçŽ, ä¸ćçšéŤ, íęľě´, ภาชาŕšŕ¸ŕ¸˘, Arabic
-
Support for tethered shooting
The new firmware adds tethered shooting capability, which can be used by connecting the X-S10 to a computer installed with either âCapture Oneâ*1, âTether Shooting Plug-in for AdobeÂŽ PhotoshopÂŽ LightroomÂŽâ or âFUJIFILM X Acquire.â The tethered shooting function can be used both via the USB cable connection and also wirelessly over a Wi-Fi network.
*1 Today, Capture One is not compatible with the X-S10 tether shooting function. The Capture One is to be upgraded. For detail, visit the website below.
URL: https://www.captureone.com/en/resources/tech-specs/camera-support-fujifilm -
Firmware enables remote control functionality from gimbal via USB communications
With this firmware update, combining the X-S10 with a compatible gimbal that supports remote control functionality will allow users to start / stop video recording, specify exposure settings for video (shutter speed, aperture value, ISO sensitivity and exposure compensation), and make manual focus adjustments. Guilin Zhishen Information Technology Co., Ltd (ZHIYUN) has announced the intention of offering compatible products for the new X-S10 firmware update.
-
Function-specific locking
The new firmware adds a Lock option to the settings for buttons and dials in the Setup menu. By enabling the function, the unintended changes of dial / button settings will be prevented.
-
Improvement of shutter speed setting for TTL slow sync flash shooting
In P and A mode, this firmware makes the slowest shutter speed slower than 1/8 sec. for the shooting used in a scene where relatively long exposure is required (ex. a flash shooting with night view background). In case the shutter speed setting is AUTO, the shutter speed becomes max. 4 sec in P mode and max. 30 sec. in A mode.
-
Display of âIP ADDRESSâ in Setup Menus > CONNECTION SETTING > INFORMATION is added.
-
In case of using the FUJIFILM X Webcam the option in the menu changes from âX WEBCAMâ to âUSB TETHER SHOOTING AUTOâ. Also, the setting screen displayed on a PC can be used.
-
The phenomenon is fixed that the position of the spot metering is fixed on the center without reflecting the postion of the focus area in case the focus mode is MF and the metering mode the spot.
-
The phenomenon is fixed that an image cannot be played back with a specified file name created by the EDIT FILE NAME function.
-
Fix of minor bugs.
The firmware update Ver.1.04 from Ver.1.02/1.03 incorporates the following issues:
-
For the case that âAUTOâ is selected by the Mode Dial and a face is detected in a dark environment, a setting is changed to avoid a blur image caused by hand shaking and/or moving subjects.
-
A camera doesnât recognize an Apple Silicon Mac via a USB cable.
-
Fix of minor bugs.
The firmware update Ver.1.02 from Ver.1.01 incorporates the following issues:
-
In case that AUTO is selected by the Mode Dial or AUTO is selected in MIN. SHUTTER SPEED of ISO setting, the shutter speed setting is changed to avoid a blur image caused by hand shaking and/or moving subjects.
-
ELECTRONIC LEVEL can be used when AUTO is selected by the Mode Dial.
-
Fix of a minor bug.
The firmware update Ver.1.01 from Ver.1.00 incorporates the following issue:
-
The phenomenon is fixed that while the microphone/remote release connector is used, a camera doesnât work well in a specific condition. If you use a microphone or a remote release, make sure to upgrade the firmware.
Firmware Update Steps
- Check the firmware version.
- Prepare a formatted memory card.
- Download the firmware and copy it to the card.
- Put the memory card with the firmware in the camera and update it.
Precaution
If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here*Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
- You can update the firmware from old version directly to the latest one.
- Firmware updating requires approximately 5 minutes.(maximum)
- Once the firmware has been updated, some data of the previous version cannot be restored.
- Please check here if you encounter any problems.
Download
X-S10 License Agreement
Please read this Agreement carefully before downloading this upgraded version software (âFIRMWAREâ). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.
Article 1. License
FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (âFUJIâ) already distributed to you included with FUJIâs product(s) (âORIGINAL FIRMWAREâ). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED âAS ISâ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Article 3. Restrictions
You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.
Caution
*Make sure there isnât any file with the same name in the destination of the firmware to save. If there is a file with the same name, the browser may automatically alter the name of the firmware like the name and (1). A camera will not recognize the firmware correctly with an altered name like that.
Firmware compatibility table
- Please use your camera and lens with the latest version of firmware. If you donât use them with the latest version, you may not enjoy their full performance. Check the compatibility table below.