GF55mmF1.7 R WR Firmware update
Version: 1.10
Last Updated: 06.06.2024
Overview
NOTES
Please read this update after refreshing this page.
- In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the āControlā key and āF5ā key.
- In case of Mac (Safari / Google Chrome), hold down the āCommandā key and āRā key.
- In case of Mac (FireFox), hold down the āCommandā, āShiftā and āRā keys at same time.
The firmware upgrade is not required if its version is latest.
- Refer to ā2) Firmware version checking procedureā in the āDetail of firmware update stepsā below to check the firmware version.
Please use your camera and lens with the latest version of firmware.
- If you donāt use them with the latest version, you may not enjoy their full performance. Check the latest firmware version from the link below.
Detail of the firmware update
The firmware update Ver.1.10 from Ver.1.00 incorporates the following issue:
-
The operability of the āFocus ringā is improved when using the following applicable camera.
1) Applicable camera (*1)
ć»GFX100 II2) Improved items (*2)
ć»Lens vibration at zooming using the āFocus ringā is reduced.
ć»Focus tracking when operating the focus ring is improved.
ć»Focus ring rotation angle is optimized for movie taking.*1ļ¼Camera firmware update is required to enable the above improvements. Be sure to update the camera firmware to the latest version before updating the lens firmware.
GFX100 II Firmware update Ver.2.20
*2ļ¼āFOCUS RING OPERATIONā must be set to āLINEARā to enable these improvements. Be aware that these improvements will not be enabled when āNONLINEARā is selected.
Operation flow to set āFOCUS RING OPERATIONā: SEUP MENUļ¼BUTTON/DIAL SETTINGļ¼FOCUS RING OPERATION
Firmware Update Steps
- Check the firmware version.
- Prepare a formatted memory card.
- Download the firmware (zip file) and decompress it.
- Copy the decompressed firmware to the card.
- Put the memory card with the firmware in the camera and update it.
Precaution
If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here*Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
- You can update the firmware from old version directly to the latest one.
- Firmware updating requires approximately 5 minutes.(maximum)
- Once the firmware has been updated, some data of the previous version cannot be restored.
- Please check here if you encounter any problems.
Download
GF55mmF1.7 R WR License Agreement
Please read this Agreement carefully before downloading this upgraded version software (āFIRMWAREā). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.
Article 1. License
FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (āFUJIā) already distributed to you included with FUJIās product(s) (āORIGINAL FIRMWAREā). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED āAS ISā WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Article 3. Restrictions
You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.
Caution
*Make sure there isnāt any file with the same name in the destination of the firmware to save. If there is a file with the same name, the browser may automatically alter the name of the firmware like the name and (1). A camera will not recognize the firmware correctly with an altered name like that.
Firmware compatibility table
- Please use your camera and lens with the latest version of firmware. If you donāt use them with the latest version, you may not enjoy their full performance. Check the compatibility table below.
