X-T30 III Firmware update
Version: 1.10
Last Updated: 04.06.2026
Overview
NOTES
Please read this update after refreshing this page.
- In case of Windows (Internet Explorer / FireFox / Google Chrome), hold down the “Control” key and “F5” key.
- In case of Mac (Safari / Google Chrome), hold down the “Command” key and “R” key.
- In case of Mac (FireFox), hold down the “Command”, “Shift” and “R” keys at same time.
The firmware upgrade is not required if its version is latest.
- Refer to “2) Firmware version checking procedure” in the “Detail of firmware update steps” below to check the firmware version.
Please use your camera and lens with the latest version of firmware.
- If you don’t use them with the latest version, you may not enjoy their full performance. Check the latest firmware version from the link below.
Firmware update via the smartphone or a tablet.
- The firmware of a camera paired with a smartphone can be updated via the smartphone and a tablet.
The method of firmware update via a smartphone
The changed settings can be saved in the FUJIFILM TETHER APP.
- We would recommend you save the settings if you have changed them from default ones. For detail, visit the FAQ website.
Detail of the firmware update
The firmware update Ver.1.10 from Ver.1.01 incorporates the following issues:
Regarding the details of No.1 download the “X-T30 III New Features Guide［Ver.1.10]” from our website.
・X-T30 III New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic
-
instax™ series pairing registration and printing supports.
(1)Hybrid camera instax Evo series and instax LiPlay series are added to the supported printers, so that you can transfer your favorite images and print them by pairing your camera.
Note：Be sure to update the instax™ series firmware to the latest version before connecting the instax™ series to a camera.
(2)“instax DIRECT PRINT” function is added to “BUTTON/DIAL SETTING” in the Setup menu, so that you can jump directly to the print start screen for the image currently displayed in the Playback menu, and print it easily by pressing the button assigned to this function as follows.
[Operation flow to assign “instax DIRECT PRINT”]
[Setup menu] ➔ [BUTTON/DIAL SETTING] ➔ [Fn BUTTON SETTING] ➔ [instax DIRECT PRINT](3)“NETWORK/USB SETTING” in the Setup menu or “instax IMAGE QUALITY MODE” in the Playback menu is added, so that you can select the image quality settings below for printing to the instax™ series.
[Image quality settings]
・instax-Rich Mode：Print with rich color expression.
・instax-Natural Mode：Print with conventional image quality. -
Print count display for the instax™ series with the “FUJIFILM XApp”.
The number of prints made with the instax™ series is displayed in the “instax PRINT COUNT” of the “FUJIFILM XApp”.
Note:Be sure to update the “FUJIFILM XApp” application software to Version 2.7.5 to enable this feature.
-
Other minor bugs fixes.
Several minor firmware bugs are fixed.
The firmware update Ver.1.01 from Ver.1.00 incorporates the following issue:
-
The LCD color tone is optimized to produce more neutral colors.
Firmware Update Steps
- Check the firmware version.
- Prepare a formatted memory card.
- Download the firmware and copy it to the card.
- Put the memory card with the firmware in the camera and update it.
Precaution
If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here*Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
- You can update the firmware from old version directly to the latest one.
- Firmware updating requires approximately 5 minutes.(maximum)
- Once the firmware has been updated, some data of the previous version cannot be restored.
- Please check here if you encounter any problems.
Download
X-T30 III License Agreement
Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.
Article 1. License
FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you included with FUJI’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Article 3. Restrictions
You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.
Caution
*Make sure there isn’t any file with the same name in the destination of the firmware to save. If there is a file with the same name, the browser may automatically alter the name of the firmware like the name and (1). A camera will not recognize the firmware correctly with an altered name like that.
Firmware compatibility table
- Please use your camera and lens with the latest version of firmware. If you don’t use them with the latest version, you may not enjoy their full performance. Check the compatibility table below.
